Open hours: Mon - Sat 8.00 - 17.00
Fast Shipping Provided by Canada Post
819-212-3863 info@srs-concept.com
Close
Saint-Denis de Brompton, Qc J0B 2P0 1955, Route 222
819-212-3863 info@srs-concept.com
Open hours: Mon - Sat 8.00 - 17.00

Dimple dies

93.33% of buyers said they were satisfied.
(3 customer reviews)

35.45$162.22$

  • CAD: 45.21$ - 206.89$
  • GBP: £26.08 - £119.33
  • EUR: €29.82 - €136.46
  • AUD: $47.02 - $215.19

You want to make some beautiful lightweight piece of art ? Add more strength to sheet of steel, aluminum, stainless steel ? This is for you.

Hassle Free Returns

No questions asked, 14 days return policy*.

Fast Shipping

All orders are shipped in 1-3 business days.

Secure Checkout

SSL Enabled Secure Checkout

Clear
SKU: N/A Category: Product ID: 1620

Description

You want to make some beautiful lightweight piece of art ? Add more strength to sheet of steel, aluminum, stainless steel ? These die are designed to flare at 45 degre with a radius of 1/4, your 1 inch hole will make a 1.500 inch at the outside of the flared hole. Can be used on a hydraulic press or with an hammer.

Available in 4 size:
-0.5 inch
-1.0 inch
-1.5 inch
-2.0 inch

Kits are also available:
-Novice include 0.5in+1.0in+1.5in
-Master include 0.5in+1.0in+1.5in+2.0in

There is the only affordable solution !!

For every one that want to build something great !

Share your project with us ! Best project will be introduce in our gallery !

Additional information

Weight 1.546 kg
Dimensions 3 × 7 × 14 cm
Model

0,5po, 1,0po, 1,5po, 2.0po, Novice kit, Master kit

3 reviews for Dimple dies

  1. Luc alexandre Blay (verified owner)

  2. ronald pelletier (verified owner)

  3. Jonathan V. (verified owner)

Add a review

Your email address will not be published. Required fields are marked *

Questions and answers of the customers

  1. A They are made from 1045 carbon steel.
  2. A They are designed for thin sheet primarily for give rigidity and remove a good weight percent of your constructions. But you can also do it in more thicker materials up to 3/16 of an inch ( 5mm ). Mainly is depend on your method. A 10lbs hammer or a little 5T hydraulic press is good for 1/16 and less thick steels sheets but if you want to go thicker, you will need more pressing power. Always remember to lubricate when you forming metals.
Phone: 819-212-3863
1955, Route 222
Saint-Denis de Brompton, Qc J0B 2P0