Solid Brake Slider Pins Kit V2 ( With Dust Guard )

Description

This is the new solid caliper pins slider kit for BMW. When you give some abuse to your your machine, the oem rubber mounting make the caliper flex and
put the stress on the pads and the piston. That will cause lost of braking power, premature wear or in some case the rubber just pop out ( we already have this problem on our drift car )
The sleeve was made from premium quality brass for long lasting.The dust cap Withstand temperatures up to 445° F for 15 minutes. Durometer is 86A. Color is black.

Easy to install but may need some adjustment, we frequently see dents or scars on the slider pins. This need to be resolved before installing this kit because the inside is precision made and required a straight surface. We normally remove the scars ( generally only at the allen key end ) using a light file or soft sand paper.

This version is only to suite on some models that need longer sleeves at front*. Most of BMW’s need 8 short sleeves but the list of vehicle above is for the models that need the long V2 at front and the short V1 at rear. ( contact us if you want to be 100% sure )

-Install it !
-Take a ride !
-These sleeves was made from premium quality brass. build just for you !
-Each purchase are for 4 sleeve, 4 snap ring and 4 caps ( a kit for 2 calipers only for each buy it now ! )
-Professional installation is recommended.

You need 1 kit for the front and 1 for the rear. So 2 kit for completing 1 entire car.*

Parts included in the single kit:
-4 Sleeve
-4 Snap ring
-4 Caps

*I repeat again, you need 8 sleeve per cars, 1 front kit and one rear kit.

Fit on following vehicles: ( This V2 kit is only for front !!! )