You want to drift like a smoke master ? The oem angle with full ackerman is killing you ? We can help you with that ! This kit will improve the your steering geometry for the drift application by removing the oem ackerman effect. Your front wheels will stay parallel at any time so you can go sideways as long as you want and will save your front tire ! In their stock configuration, E30’s have approximately 20degrees on the outer side and 30degrees on the inner side when full lock happen. This kit gives you a noticeable upgrade ! Between 50 and 55degre of angle which more than doubles the original !
Kits are available to Fit on:
BMW E30, E36, E36 M3, Z3 and Z3M
-Remove your old control arm and tie rods !
-Bolt the new kit !
-Take a ride !
-This kit was made with the highest quality materials, procedures and all parts are standard industrial grade. Easy to find replacement locally.
-Each purchase are for 2 complete control arms, 2 complete tie rods, 2 knuckle plates and all the necessary hardware.
-No refund available, all sell are finale.
Arm length: 50mm more each side
Colour: Orange powdercoat ( other colours available with extra cost and delay )
– 2 Arms ( with all ball joints )
– 2 knuckles plates ( with all adapting parts )
– 2 Complete tie rod end ( E36 replacement inner tie rod, high strength bronze race ball joint and T6 aluminum extension )
– Complete hardware kit ( all bolts are grade 8 minimum )
*The design of these parts can change at any times.